HARMAN KARDON RM10
User Guide

SPECIFICATIONS
RM10
Description Maximum Recommended Amplifier Power* Power Handling (Continuous/Peak) Nominal Impedance Sensitivity (2.83V/1m) Frequency Response (�3dB) Crossover Frequency High-Frequency Transducers Low-Frequency Transducer Baffle Ports Network Terminals Dimensions (H x W x D) Weight per Speaker 3-Speaker, 2-way 10" (250mm) vocal monitor 175W 50W/400W 8 Ohms 92dB 40Hz � 20kHz 1,700Hz Dual 3" (75mm) cones with high-temperature voice coils 10" (250mm) Cone with high-temperature voice coil, shielded Low diffraction, IsoPower� Dual FreeFlow� flared Straight-Line Signal Path� (SSP�) with left and right high-frequency trim controls Gold-plated, 5-way binding posts 13-3/16" x 20-7/8" x 9-5/8" (335mm x 530mm x 245mm) 29.7 lb/13.5kg

Declaration of Conformity

We, Harman Consumer Group International 2, route de Tours 72500 Chateau du Loir France declare in own responsibility that the product described in this owner�s manual is in compliance with technical standards:

STEAL THE SHOW.

GO PRO. �
PRO SOUND COMES HOME
®

EN 61000-6-3:2001 EN 61000-6-1:2001

�

Laurent Rault Harman Consumer Group International Chateau du Loir, France 10/05

JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA 8500 Balboa Boulevard, Northridge, CA 91329 USA 2, route de Tours, 72500 Chateau du Loir, France 516.255.4JBL (4525) (USA only) www.jbl.com © 2005 Harman International Industries, Incorporated. All rights reserved. JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Part No. PRE1986

* The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels. All features and specifications are subject to change without notice. All dimensions include grilles.